Nokia 9500 MPR - 9 High-Level Procedure for SDH Provisioning; Purpose; Procedure

WebEML User Manual High-level procedure for SDH provisioning
83
9 High-level procedure for SDH
provisioning
9.1 Purpose
This chapter provides a high-level procedure for provisioning SDH facilities and
equipment.
9.2 Procedure
1. Select action.
a. To provision cross-connect to existing SDH port, go to step 2.
b. To provision cross-connect to new SDH port, go to step 3.
c. To provision cross-connect to new SDH card, go to step 4.
2. Provision cross-connect to existing SDH port: see Provision cross connections.
3. Provision cross-connect to new SDH port:
a. See Provision equipment port to provision SDH ports.
b. See Provision cross connections to provision SDH to radio cross-connect.
4. Provision cross-connect to new SDH card:
a. See Enable equipment to enable SDH Card.
b. See Provision equipment port to provision SDH ports.
c. See Provision cross connections to provision SDH to radio cross-connect.
Release 7.0.0 3DB 19286 ACAA Issue 01