Nokia 9500 MPR - 7 High-Level Procedure for Ethernet Deprovisioning; Purpose; Procedure

WebEML User Manual High-level procedure for Ethernet deprovisioning
77
7 High-level procedure for Ethernet
deprovisioning
7.1 Purpose
This chapter provides a high-level procedure for provisioning Ethernet facilities and
equipment.
7.2 Procedure
1. Disable performance monitoring on the equipment you need to deprovision.
2. Select action.
a. To deprovision Ethernet cross-connect from Core-E Ethernet port, go to
step 3.
b. To deprovision Core-E Ethernet port, go to step 4.
c. To deprovision Core-E SFP equipment port, go to step 5.
d. To deprovision spare Core-E card, go to step 6.
e. To deprovision Ethernet cross-connect from P8ETH or EASv2 Ethernet
port, go to step 7.
f. To deprovision P8ETH or EASv2 Ethernet port, go to step 8.
g. To deprovision P8ETH or EASv2 SFP equipment port, go to step 9.
h. To deprovision P8ETH or EASv2 card, go to step 10.
3. Deprovision Ethernet cross-connect from Core-E Ethernet port: see Deprovision
cross connections.
4. Deprovision Core-E Ethernet port:
a. See Deprovision cross connections to deprovision Ethernet cross-connects
associated with Core-E Ethernet port.
b. See Provision Ethernet ports to disable Core-E Ethernet port.
Release 7.0.0 3DB 19286 ACAA Issue 01