Nokia 9500 MPR - 6 High-Level Procedure for Ethernet Provisioning; Purpose; Procedure

WebEML User Manual High-level procedure for Ethernet provisioning
73
6 High-level procedure for Ethernet
provisioning
6.1 Purpose
This chapter provides a high-level procedure for provisioning Ethernet facilities and
equipment.
6.2 Procedure
1. Select action.
a. To provision Ethernet cross-connect to existing Core Ethernet port, go to
step 2.
b. To provision Ethernet cross-connect to new Core Ethernet port, go to
step 3.
c. To provision Ethernet cross-connect to new Core SFP equipment port, go
to step 4.
d. To provision Ethernet cross-connect to new spare Core-E card, go to
step 5.
e. To provision Ethernet cross-connect to existing P8ETH or EASv2 Ethernet
port, go to step 6.
f. To provision Ethernet cross-connect to new P8ETH or EASv2 Ethernet port,
go to step 7.
g. To provision Ethernet cross-connect to new P8ETH or EASv2 SFP
equipment port, go to step 8.
h. To provision Ethernet cross-connect to new P8ETH or EASv2 card, go to
step 9.
2. Provision Ethernet cross-connect to existing Core-E Ethernet port:
a. See Provision port segregation/connectivity to verify/provision port
segregation on Core-E electrical Ethernet ports.
b. See Provision cross connections to provision Ethernet cross-connect.
Release 7.0.0 3DB 19286 ACAA Issue 01