WebEML User Manual Deprovision cross connections
383
44 Deprovision cross connections
44.1 Purpose
The procedures in this chapter are used to deprovision cross connections.
44.2 General
None.
44.3 Procedures
This section provides the following procedures:
• To open the Cross Connections menu
• To deprovision a PDH to Radio cross connect
• To deprovision a PDH to Ethernet cross connection
• To deprovision an SDH to Radio cross connect
• To deprovision an SDH to LAG cross connection
• To deprovision an Ethernet to Radio cross connection
• To deprovision a Radio to Radio cross connection
• To deprovision PDH to Ring cross connection
• To deprovision a Radio to Ring cross connection
• To deprovision an Ethernet to Ring cross connection
• To deprovision a Ring to Ring cross connection
To open the Cross Connections menu
• From the main menu bar, select Configuration>Cross Connections.
The Cross Connections window opens. See Figure 212.
Note: The figures in this chapter show the MSS-8 cross-connection screen, however, the
operation is similar for all MSS shelves.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...