Enable equipment
512
WebEML User Manual
Figure 328 Enabled MPT-HC ODU on Core-E electrical Ethernet port
9.
Verify port segregation provisioning. Port segregation should be provisioned
between parallel MPT ODU radio paths at both ends when they exist on the NE.
Port segregation should be provisioned between the Core MPT ODU port and
other Ethernet and/or radio ports where connectivity is not desirable. See
Provision port segregation/connectivity for detailed steps to view/provision port
segregation.
To enable an MPT ODU on P8ETH or EASv2 card
1. Select a slot that is equipped to support P8ETH or EASv2 card and the MPT
ODU in the resource tree area. The selected name will highlight in blue. This
selection also highlights the card in blue on the graphical representation of the
MSS shelf in the resource list area.
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...