WebEML User Manual Provision equipment port
437
Figure 256 Provision MSS-1 Sync-In/Out SFP port
4. Click Apply.
The SFP is ready to be configured as Sync-In and Sync-Out ports. See
Administer synchronization.
To provision an EAS card SFP port
1. Select the slot where the card is equipped in the resource tree area. The
selected name will highlight in blue. This selection also highlights the P8ETH or
EASv2 card in blue on the graphical representation of the MSS-4/MSS-8 shelf
in the resource list area.
2. Click the Settings Tab in the resource detail area. See Figure 257.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...