Nokia 9500 MPR - Figure 653 MPT-HC Settings Tab with ATPC

Configure radio parameters
870
WebEML User Manual
Figure 653 MPT-HC Settings tab with ATPC
54. Provision MPT ODU radio channel ATPC:
i. Select the ATPC Enabled check box.
ii. Enter the Min and Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold (-min / -max dBm).
iv. Click Apply.
55. Select an action.
a. To Provision the spare MPT ODU ATPC, go to step 56.
b. To Provision the MPT ODU radio protection scheme, go to step 58.
56. Provision the spare MPT ODU ATPC
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see Figure 653 for an example of the ATPC settings.
57. Provision the spare MPT ODU radio channel ATPC:
Release 7.0.0 3DB 19286 ACAA Issue 01