WebEML User Manual Configure radio parameters
869
b. To Provision the MPT ODU Automatic Transmit Power Control (ATPC), go
to step 53.
48. Provision the MPT ODU Manual Transmit Power Level (RTPC)
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see Figure 648.
49. Provision MPT ODU radio channel transmit power level:
i. Enter the TxPower (dBm) level (supported power levels are band and
modulation specific).
ii. Click Apply.
50. Select an action.
a. To Provision the spare MPT ODU RTPC, go to step 51.
b. To Provision the MPT ODU radio protection scheme, go to step 58.
51. Provision the spare MPT ODU RTPC
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see Figure 652.
52. Provision Spare MPT ODU radio channel transmit power level:
i. Enter the TxPower (dBm) level (supported power levels are band and
modulation specific).
ii. Click Apply.
53. Provision the MPT ODU Automatic Transmit Power Control (ATPC)
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see Figure 653.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...