Nokia 9500 MPR - 4 High-Level Procedure for DS3 Provisioning; Purpose; Procedure

WebEML User Manual High-level procedure for DS3 provisioning
69
4 High-level procedure for DS3
provisioning
4.1 Purpose
This chapter provides a high-level procedure for provisioning DS3 facilities and
equipment.
4.2 Procedure
1. Select action.
a. To provision DS3 cross-connect to existing DS3 port, go to step 2.
b. To provision DS3 cross-connect to new DS3 port, go to step 3.
c. To provision DS3 cross-connect to new DS3 P2E3DS3 card, go to step 4.
2. Provision DS3 cross-connect to existing DS3 port: see Provision cross
connections.
3. Provision DS3 cross-connect to new DS3 port:
a. See Provision equipment port to provision DS3 ports.
b. See Provision cross connections to provision DS3 cross-connect.
4. Provision DS3 cross-connect to new DS3 P2E3DS3 card:
a. See Enable equipment to enable P2E3DS3 Card.
b. See Provision equipment port to provision DS3 ports.
c. See Provision cross connections to provision DS3 cross-connect.
Release 7.0.0 3DB 19286 ACAA Issue 01