Nokia 9500 MPR - 8 High-Level Procedure for Ethernet LAG Provisioning; Purpose; Procedure

WebEML User Manual High-level procedure for Ethernet LAG
provisioning
81
8 High-level procedure for Ethernet LAG
provisioning
8.1 Purpose
This chapter provides a high-level procedure for provisioning Ethernet LAG facilities
and equipment.
8.2 Procedure
1. Select action.
a. To provision Ethernet cross-connect to existing Ethernet LAG port, go to
step 2.
b. To provision Ethernet cross-connect to new Ethernet LAG port, go to step 3.
c. To provision Ethernet cross-connect to new Ethernet LAG port, go to step 4.
2. Provision Ethernet cross-connect to existing Ethernet LAG port:
a. See Provision port segregation/connectivity to verify/provision port
segregation on Core-E Ethernet ports.
b. See Provision cross connections to provision Ethernet cross-connect.
3. Provision Ethernet cross-connect to new Ethernet LAG port:
a. See Provision Ethernet ports to verify Core-E Ethernet ports are provisioned
with desired port parameters.
b. See Administer L1/L2 radio and L2 Ethernet LAG ports to provision new
Ethernet LAG port.
c. See Provision port segregation/connectivity to verify/provision port
segregation on new Ethernet LAG port.
d. See Provision cross connections to provision Ethernet Cross-Connection to
new Ethernet LAG port.
4. Provision Ethernet cross-connect to new Ethernet LAG ports:
a. See Provision equipment port to provision Core-E equipment ports.
Release 7.0.0 3DB 19286 ACAA Issue 01