Nokia 9500 MPR - Figure 711 Configuration Settings Screen; 62 Apply a Configuration Using the Web Server

Apply a configuration using the Web Server
946
WebEML User Manual
4.
If the NE is already configured, the DB CLEAR and NE RESTART button
appears on the Configuration Setting screen. Click on the button to clear the
database.
A confirmation dialog box appears.
5. Click on the OK button to proceed. The NE restarts.
6. Log back in to the Web Server and select Configuration → Configuration
Setting. The Configuration Setting screen opens, see Figure 711.
Figure 711 Configuration Settings screen
7. Click on the Browse button and navigate to the configuration file. The Upload
Configuration button appears.
8. Click on the Upload Configuration button. The Web Server checks the
configuration parameters. When the check is passed the View Parameters and
Apply to NE buttons become available.
9. Click on the View Parameters button if necessary to check the information
provided in the configuration file.
Click on the Apply to NE button to apply the configuration.
10. When the configuration setting is complete, a summary appears on the screen.
Figure 712 provides an example.
Caution: Clearing the NE database will reset the local IP address.
Release 7.0.0 3DB 19286 ACAA Issue 01