Provision cross connections in a mixed fiber/
microwave Ring
590
WebEML User Manual
Figure 397 Sample mixed fiber/microwave Ring
The sample Ring consists of nodes A, B, C, D, I, J and K. Nodes A, B, C and D are
members of the Ring’s fiber chain. NEs E, F, G, and H connect to the Ring’s fiber
chain using Ethernet connections.
55.3 Procedures
This section provides the following procedures. All examples are based on the
sample Ring shown in Figure 397.
• To provision a cross-connection between Node J and Node K
• To provision a cross-connection between Node J and Node D
• To provision a cross-connection between Node J and Node D (protected)
• To provision a cross-connection between Node K and Node B
• To provision a cross-connection between Node K and Node B (protected)
• To provision a cross-connection between Node I and NE G
• To provision a cross-connection between Node I and NE G (protected)
• To provision a cross-connection between Node I and NE E
• To provision a cross-connection between Node I and NE E (protected)
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...