Nokia 9500 MPR - Latitude and Longitude; Procedures

WebEML User Manual Administer system settings
177
22.2.10 Latitude and Longitude
The Latitude and Longitude values, if available, are displayed in the Latitude and
Longitude fields. The fields are read-only.
22.3 Procedures
This section provides the following procedures:
• To open the System Settings menu
• To provision Tributary Port Configuration (ETSI market only)
• To provision DHCP server using JUSM/CT 9500 MPR
• To Provision DHCP server using the Web Server
• To provision Ethernet LOS Criteria
• To provision Static LAG Criteria
• To provision the System Priority parameter
• To provision AIS Insertion for LOF on DS1
• To provision the Event and Alarm Log
• To retrieve the NE MAC Address/Bridge Address
• To provision SNMP mode using JUSM
• To provision SNMP mode using the Web Server
• To retrieve Latitude and Longitude
To open the System Settings menu
• From the main menu bar, select Configuration>System Settings.
The System Settings tab opens. See Figure 84 for the ANSI market and
Figure 85 for the ETSI market.
Release 7.0.0 3DB 19286 ACAA Issue 01