WebEML User Manual Administer system settings
181
3. Click on the Close button.
To provision Static LAG Criteria
1. From the Static Log drop-down menu, select Static Log Criteria provisioning:
Disabled or Enabled.
2. Click on the Apply button.
3. Click on the Close button.
To provision the System Priority parameter
1. From the System Priority field, enter System Priority Parameter value: 0 to
65535 (default: 32,768).
2. Click on the Apply button.
3. Click on the Close button.
To provision AIS Insertion for LOF on DS1
1. From the AIS Insertion for LOF detection on DS1 drop-down menu, select:
Disabled or Enabled.
2. Click on the Apply button.
3. Click on the Close button.
To provision the Event and Alarm Log
1. From the Logging drop-down menu, select Event and Alarm Log provisioning:
Disabled or Enabled.
2. Click Apply.
3. Click on the Close button.
To retrieve the NE MAC Address/Bridge Address
1. From the NE MAC Address/Bridge Address field, record the Bridge Address.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...