Administer system settings
182
WebEML User Manual
2. Click on the Close button.
To provision SNMP mode using JUSM
1. In the SNMP Mode Migration field, choose SNMPv2 or SNMPv3. SNMPv2 is
chosen by default.
2. Click Apply.
3. Click on the Close button. The NE restarts.
To provision SNMP mode using the Web Server
1. Log In to NE to provision SNMP Mode using web browser. For detailed steps to
log in to an NE using a web browser, see Log in to and out of system.
The 9500MPR Web Server displays. Active Alarms is the default web server
window.
2. On Main Menu pane, select Snmp Version.
The Snmp version window displays, showing the current version.
Caution: Changing the SNMP Mode will cause the NE to restart.
Caution: When the NE has been configured to operate in SNMPv3 mode, it is not possible
to return it to SNMPv2 mode without clearing the database.
Caution: Changing the SNMP Mode will cause the NE to restart.
Caution: When the NE has been configured to operate in SNMPv3 mode, it is not possible
to return it to SNMPv2 mode without clearing the database.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...