Nokia 9500 MPR - Page 179

WebEML User Manual Administer system settings
179
Figure 85 System Settings menu (ETSI market)
To provision Tributary Port Configuration (ETSI market only)
1. From the Impedance drop-down menu, select a value: Unbalanced 75 ohm or
Balanced 120 ohm.
2. Click on the Apply button.
3. Click on the Close button.
To provision DHCP server using JUSM/CT 9500 MPR
1. From the DHCP Server drop-down menu, select DHCP Server provisioning:
Disabled or Enabled.
2. Click on the Apply button.
Release 7.0.0 3DB 19286 ACAA Issue 01