Nokia 9500 MPR - Page 75

WebEML User Manual High-level procedure for Ethernet provisioning
75
a. See Provision equipment port to provision P8ETH or EASv2 SFP
equipment port.
b. See Provision port segregation/connectivity to verify/provision port
segregation on P8ETH or EASv2 SFP Ethernet port.
c. See Provision Ethernet ports to provision P8ETH or EASv2 Ethernet port.
d. See Provision cross connections to provision Ethernet cross-connect.
9. Provision Ethernet cross-connect to new P8ETH or EASv2 card:
a. See Enable equipment to enable P8ETH or EASv2 Card.
b. See Provision port segregation/connectivity to verify/provision port
segregation on P8ETH or EASv2 electrical Ethernet port.
c. See Provision equipment port to provision P8ETH or EASv2 SFP
equipment port.
d. See Provision port segregation/connectivity to verify/provision port
segregation on P8ETH or EASv2 SFP Ethernet ports.
e. See Provision Ethernet ports to provision P8ETH or EASv2 Ethernet port.
f. See Provision cross connections to provision Ethernet cross-connect.
10. Administer EFM OAM:
a. See Configure EFM OAM to configure EFM OAM.
b. See OAM Remote Loopback to configure OAM Remote loopbacks.
Release 7.0.0 3DB 19286 ACAA Issue 01