Nokia 9500 MPR - Page 1042

RF Core Facing Loopback
1042
WebEML User Manual
1. Open the appropriate main view for the configuration and select the Settings
tab. See Figure 777.
2. Set the Tx Power to the value recorded in step 2b.
3. Click on the Apply button.
4. Select the Maintenance tab. See Figure 776.
5. Select the Not Active radio button in the Activation field.
6. Click on the Apply button. The Loopback is now deactivated.
Release 7.0.0 3DB 19286 ACAA Issue 01