Provision Ethernet Ring Protection (ERP)
568
WebEML User Manual
i. Save the configuration file to be used to re-provision any deleted cross-
connections and/or VLANs. For a detailed procedure, see View NE
Inventory data.
ii. Open the cross-connection window. For a detailed procedure see
Deprovision cross connections.
iii. Delete all existing cross-connections associated with the radio ports to be
added to the ERP topology.
iv. Open the VLAN configuration window. For a detailed procedure, see
Administer VLAN configuration.
v. Delete all existing VLANs associated with the radio ports to be added to the
ERP topology.
These cross-connections and VLANs will be re-provisioned to the new ERP
according to this procedure.
3. Provision ERP Topology using the following procedure:
See Figure 381 for the following steps:
a. Enter the ERP Topology Label in the Label field.
b. From the East Port drop-down menu, select east radio direction
c. From the West Port drop-down menu, select west radio direction
d. Click Create.
Caution: For radios to be associated with a new ERP topology which have existing cross-
connections and/or VLAN traffic provisioned, ERP topology provisioning is traffic affecting.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...