WebEML User Manual Provision Ring cross-connections using the
aided cross-connection tool
753
56.2.2 Aided Cross-connection in Cross-connections
panel
At the cross-connection creation, each MAC address parameter requested is
automatically selected by the tool, or a short list of MAC address options is provided.
Additional information, according to the type of cross-connection, is requested by the
GUI to determine the MAC addresses.
You can also create cross-connections without using the tool: select the Manual
radio button to enter the MAC address.
56.3 Procedure
1. Pre-provisioning tool
From the Configuration menu, choose Ring’s Fiber Chain Description to launch
the pre-provisioning tool, see Figure 567.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...