Configure radio parameters
872
WebEML User Manual
59. Select Equipment Protection in the resource tree area.
60. From the Restoration Criteria panel, verify the Restoration Criteria selection and
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
61. Select HSB Protection in the resource tree area.
62. From the Restoration Criteria panel, verify the Restoration Criteria selection and
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
63. Select Rx Radio Protection in the resource tree area.
64. From the Restoration Criteria panel, verify the Restoration Criteria selection and
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Click Apply.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...