WebEML User Manual Open and run performance monitoring
989
To run Adaptive Modulation PM on a radio port
1. From the resource tree area, select the Adaptive Modulation PM pane.
2. From the Adaptive Modulation pane, select the radio port to on which to run
Adaptive Modulation PM.
3. Click Stopped to start the monitoring. Figure 743 shows adaptive modulation
PM.
Note: In case of usage of analog measurement the maximum suggested number
of Analog measurement windows that can be opened at the same time is 12.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...