WebEML User Manual Open and run performance monitoring
995
To modify a TCA threshold
1. Open the Threshold Editor.
The Thresholds Editor window opens.
2. From the Available Thresholds panel, select the radio PM type tab: SDH PM,
PDH PM, Radio PM Hop, or Radio PM Link.
3. Select the threshold index to modify.
4. From the Editing Section panel, click Modify.
The threshold index to modify is copied to the Index Editor panel.
5. Update the threshold index values in the Index Editor panel.
6. From the NE Commands panel, click Apply.
The threshold values are updated in the Available Thresholds panel.
7. Close the Thresholds Editor window.
To delete a TCA Threshold
1. Open the Threshold Editor.
The Thresholds Editor window opens.
2. From the Available Thresholds panel, select the radio PM tab: Radio PM Hop,
or Radio PM Link.
3. Select the Threshold index to delete.
Note: In the SDH PM, E1/DS1 PM and Radio PM Hop threshold tabs, thresholds #1 and #4
are default thresholds. In the Radio PM Link threshold tab, thresholds #1 and #3 are default
thresholds. These default thresholds are not editable.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...