WebEML User Manual Upgrade and downgrade radio profile
1059
3. From the radio direction Modulation drop-down menu, select the new
modulation value.
4. Click on the Apply button.
5. Verify the Tx power provisioning and adjust, as described in the site
documentation.
6. Verify that the radio direction is alarm free.
7. Verify that the radio direction is error free and operating as expected.
Note: If the sum of all TDM2TDM and TDM2ETH cross-connections exceed the
supported capacity for the new radio channel, the request to change radio profile
will be rejected.
Note: To complete downgrade of radio profile both ends of the radio hop must be
downgraded.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...