Upgrade and downgrade radio profile
1058
WebEML User Manual
74.4 Procedures
This section provides the following procedures:
• To upgrade a radio profile
• To downgrade a radio profile
To upgrade a radio profile
1. Verify that the system license key supports the new radio profile. For information
about how to display and upgrade the system license key, see Administer
software license.
2. From the radio direction Reference Channel Spacing drop-down menu, select
new channel bandwidth.
3. From the radio direction Modulation drop-down menu, select the new
modulation value.
4. Click on the Apply button.
5. Verify the Tx power provisioning and adjust, as described in the site
documentation.
6. Verify that the radio direction is alarm free.
7. Verify that the radio direction is error free and operating as expected.
To downgrade a radio profile
1. Open the radio channel view. Take a screen capture to save all radio channel
provisioning information.
2. From the radio direction Reference Channel Spacing drop-down menu, select
the new channel bandwidth.
Caution: This is an Out-of-Service procedure. Schedule appropriate maintenance window
per local practices and procedures.
Note: To complete an upgrade of a radio profile, both ends of the radio hop must
be upgraded.
Caution: This is an Out-of-Service procedure. Schedule appropriate maintenance window
per local practices and procedures.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...