WebEML User Manual Administer system date and time
169
Figure 81 NE Time Configuration window
2. Select date and time element to set in the Network Element Time field and
perform one or more of the following:
a. Select four-digit year yyyy, and enter the new four-digit value.
b. Select two-digit month mm, and enter the new two-digit value.
c. Select two-digit day dd, and enter the new two-digit value.
d. Select two-digit hour hh, and enter the new two-digit value.
e. Select two-digit minute mm, and enter the new two-digit value.
f. Select two-digit second ss, and enter the new two-digit value.
3. Click Apply.
The Information ‘Set NE time success!’ window opens.
4. Click OK.
5. Click Close.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...