Administer system date and time
170
WebEML User Manual
To provision NE time manually using Web Server
1. Log In to NE to view NE alarms. For detailed steps to log in to an NE using a
web browser, see Log in to and out of system.
The 9500MPR Web Server displays. Active Alarms is the default web server
window.
2. From the web server Main Menu pane, select Date & Time Setting.
The Date & Time Setting window displays. See Figure 80.
3. Select date and time element to set in the Network Element Time field and
perform one or more of the following:
a. Select four-digit year yyyy, and enter the new four-digit value.
b. Select two-digit month mm, and enter the new two-digit value.
c. Select two-digit day dd, and enter the new two-digit value.
d. Select two-digit hour hh, and enter the new two-digit value.
e. Select two-digit minute mm, and enter the new two-digit value.
f. Select two-digit second ss, and enter the new two-digit value.
4. From the GMT Time Setting field, click Apply to NE.
To provision NE Time to NTP Server using JUSM
1. From the main menu bar, select Configuration>Network Configuration> NTP
Configuration. See Figure 82.
Figure 82 NTP Configuration drop-down menu
The NTP Configuration window opens. See Figure 83.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...