WebEML User Manual MIB database management (backup and
restore)
205
3. Are forced protection switches active?
a. If yes, go to step 4.
b. If no, go to step 5.
4. Determine if the active forced protection switch(es) can be released. Release all
forced protection switch(es) prior to proceeding with this procedure.
5. Perform one of the following:
a. Disable the spare Core card. For detailed instruction, see Disable
equipment.
b. Physically unseat the spare Core card.
6. From the main menu bar, select Supervision>MIB Management>Restore /
Activate. See Figure 106.
Figure 106 Restore / Activate MIB Management Database main menu bar path
The Protocol Selection window opens, see Figure 104.
7. Choose the protocol that you need to use to transfer the data. If you need to use
SFTP, enter the username and password to access the NE.
8. Click on the OK button. The Restore window opens. See Figure 107.
Caution: Failure to release all protection switches prior to performing a MIB Management
database backup, may result in the system being restored to an unknown state. If this
occurs, communications with the system may be difficult to reestablish and may result in the
loss of traffic.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...