EasyManuals Logo

Texas Instruments TMS320 2833 Series User Manual

Texas Instruments TMS320 2833 Series
868 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background image
www.ti.com
Peripheral Frames
131
SPRUI07March 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
System Control and Interrupts
1.5.2 EALLOW-Protected Registers
Several control registers are protected from spurious CPU writes by the EALLOW protection mechanism.
The EALLOW bit in status register 1 (ST1) indicates if the state of protection as shown in Table 1-90.
(1)
The EALLOW bit is overridden via the JTAG port, allowing full access of protected registers during debug from the Code
Composer Studio interface.
Table 1-90. Access to EALLOW-Protected Registers
EALLOW Bit CPU Writes CPU Reads JTAG Writes JTAG Reads
0 Ignored Allowed Allowed
(1)
Allowed
1 Allowed Allowed Allowed Allowed
At reset the EALLOW bit is cleared enabling EALLOW protection. While protected, all writes to protected
registers by the CPU are ignored and only CPU reads, JTAG reads, and JTAG writes are allowed. If this
bit is set, by executing the EALLOW instruction, then the CPU is allowed to write freely to protected
registers. After modifying registers, they can once again be protected by executing the EDI instruction to
clear the EALLOW bit.
The following registers are EALLOW-protected:
Device Emulation Registers
Flash Registers
CSM Registers
PIE Vector Table
System Control Registers
GPIO MUX Registers
Certain eCAN Registers
XINTF Registers
Table 1-91. EALLOW-Protected Device Emulation Registers
Name Address Size
(x16)
Description
DEVICECNF 0x0880
0x0881
2 Device Configuration Register
PROTSTART 0x0884 1 Block Protection Start Address Register
PROTRANGE 0x0885 1 Block Protection Range Address Register
Table 1-92. EALLOW-Protected Flash/OTP Configuration Registers
Name Address
Size
(x16) Description
FOPT 0x0A80 1 Flash Option Register
FPWR 0x0A82 1 Flash Power Modes Register
FSTATUS 0x0A83 1 Status Register
FSTDBYWAIT 0x0A84 1 Flash Sleep To Standby Wait State Register
FACTIVEWAIT 0x0A85 1 Flash Standby To Active Wait State Register
FBANKWAIT 0x0A86 1 Flash Read Access Wait State Register
FOTPWAIT 0x0A87 1 OTP Read Access Wait State Register

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Texas Instruments TMS320 2833 Series and is the answer not in the manual?

Texas Instruments TMS320 2833 Series Specifications

General IconGeneral
BrandTexas Instruments
ModelTMS320 2833 Series
CategoryController
LanguageEnglish

Related product manuals