EasyManua.ls Logo

Texas Instruments TMS320 2833 Series

Texas Instruments TMS320 2833 Series
868 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.ti.com
Register Descriptions
517
SPRUI07March 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Direct Memory Access (DMA) Module
8.9.3 REVISION Register (Offset = 1002h) [reset = 0h]
REVISION is shown in Figure 8-10 and described in Table 8-5.
Figure 8-10. REVISION Register
15 14 13 12 11 10 9 8
TYPE
R-0h
7 6 5 4 3 2 1 0
REV
R-0h
Table 8-5. REVISION Register Field Descriptions
Bit Field Type Reset Description
15-8 TYPE R 0h DMA Type Bits.
A type change represents a major functional feature difference in a
peripheral module.
Within a peripheral type, there may be minor differences between
devices which do not affect the basic functionality of the module.
These device-specific differences are listed in the TMS320x28xx,
28xxx DSP Peripheral Reference Guide (SPRU566).
0000h = This document describes a Type0 DMA.
7-0 REV R 0h
DMA Silicon Revision Bits: These bits specify the DMA revision and
are changed if any bug fixes are performed.
0000h = First release

Table of Contents

Related product manuals