Supermicro SSE-G48-TG4 - Shutdown - Physical;Vlan;Port-Channel Interface

Release : 1.1f 102 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.64 shutdown - physical/VLAN/port-channel
Interface
This command disables a physical interface/VLAN interface/port-channel interface. The no form
of the command enables a physical interface/VLAN interface/port-channel interface.
shutdown
no shutdown
Mode
Interface Configuration Mode for physical interface / port-channel/OOB Interface
VLAN Interface Mode for VLAN interface
Defaults
The Physical Interface eth0 is enabled by default
The interface VLAN 1 is enabled by default for a VLAN interface
The Port-channel interface is disabled by default
Example
SMIS(config-if)# shutdown
All functions on the specified interface are disabled by the shutdown command
By default, if OOB interface is enabled, then the Physical Interface eth0 is disabled
Related Commands
interface - Configures an interface, which can be a physical interface or a port-channel
interface or a VLAN interface
show interfaces - Displays the interface status and configuration