Supermicro SSE-G48-TG4 - Dot1 X Default

Release : 1.1f 251 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
10.5 dot1x default
This command configures dot1x with default values for this port.
dot1x default
Mode
Interface Configuration Mode
Defaults
Per-interface 802.1X protocol enable state - Enabled (force-authorized)
Periodic reauthentication - Disabled
Number of seconds between reauthentication attempts - 3600 seconds
Quiet period - 60 seconds
Retransmission time - 30 seconds
Maximum retransmission number - 2 times
Client timeout period - 30 seconds
tx period - 30 seconds
Authentication server timeout period - 30 seconds
Example
SMIS(config-if)# dot1x default
Related Command
show dot1x - Displays dot1x interface information