Release : 1.1f 253 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
10.7 dot1x max-start
This command sets the maximum number of EAPOL retries to the authenticator and the no form
of the command sets the maximum number of EAPOL retries to the authenticator to default value.
dot1x max-start <count(1-65535)>
no dot1x max-start
Mode
Interface Configuration Mode
Defaults
3
Example
SMIS(config-if)# dot1x max-start 2
Related Command
show dot1x - Displays dot1x information
To Next Page
Loading...
