Release : 1.1f 411 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.2 DHCP Relay
16.2.1 service dhcp-relay
This command enables the DHCP Relay agent in the switch. The no form of the command
disables the DHCP relay agent.
service dhcp-relay
no service dhcp-relay
Mode
Global Configuration Mode
Defaults
Disabled
Example
SMIS(config)# service dhcp-relay
The relay agent becomes active only after it is enabled
Related Commands
show dhcp server - Displays the DHCP server information
show ip dhcp relay information - Displays the DHCP relay information
To Next Page
Loading...
