Release : 1.1f 671 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.20 passive-interface vlan
This command suppresses routing updates on an interface and the no form of the command
enables routing updates on an interface.
passive-interface vlan <vlan-id(1-4069)>}
no passive-interface vlan <vlan-id(1-4069)>
Syntax Description
vlan-id - LSA retransmissions for adjacencies belonging to the VLAN interface
Mode
Router Configuration Mode
Example
SMIS(config-router)# passive-interface vlan 1
OSPF routing information is neither sent nor received through the specified router interface. The
specified interface address appears as a stub network in the OSPF domain.
Related Commands
passive-interface default – Suppresses routing updates on all interfaces
show ip ospf interface – Displays OSPF interface information
show ip ospf request-list – Displays OSPF Link state request list information
To Next Page
Loading...
