Release : 1.1f 505 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.9 ip igmp static-group
This command adds the static group membership on the interface and the no form of the
command deletes the static group membership on the interface.
ip igmp static-group <Group Address> [source <Source Address>]
no ip igmp static-group <Group Address> [source <Source Address>]
Syntax Description
Group Address - Group IP address
source - Source IP address
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ip igmp static-group 224.1.2.3 source 12.0.0.1
The igmp version on this interface must be set to 3 for configuring static group along with
source information.
Related Commands
show ip igmp groups - Displays the IGMP groups information
show ip igmp sources - Displays the IGMP sources information
show ip igmp interface - Displays the interface configuration of IGMP
To Next Page
Loading...
