Supermicro SSE-G48-TG4 - Spanning-Tree Mst Max-Hops

Release : 1.1f 202 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.6 spanning-tree mst max-hops
This command sets the maximum number of hops permitted in the MST and the no form of the
command sets the maximum number of hops permitted in the MST to the default value.
spanning-tree mst max-hops <value(6-40)>
no spanning-tree mst max-hops
Mode
Global Configuration Mode
Defaults
20
Example
SMIS(config)#spanning-tree mst max-hops 10
The root switch of the instance always sends a BPDU with a cost of 0 and the hop count set to
the maximum value.
Related Command
show spanning-tree mst configuration - Displays multiple spanning tree instance
Configuration