Supermicro SSE-G48-TG4 - Ip Arp Max-Retries

Release : 1.1f 490 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
18.8 ip arp max-retries
This command sets the maximum number of ARP request retries. The no form of the command
sets the maximum number of ARP request retries to its default value.
ip arp max-retries <value (2-10)>
no ip arp max-retries
Mode
Global Configuration Mode
Defaults
3
Example
SMIS(config)# ip arp max-retries 2
The command configures the maximum number of ARP requests that the switch will generate
before deleting an un-resolved ARP entry.
Related Command
show ip arp – Displays IP ARP table for the given VLAN ID/IP Address of ARP entry/MAC
Address of ARP entry/IP ARP summary table/ARP configuration information