Supermicro SSE-G48-TG4 - Ip Dhcp Next-Server

Release : 1.1f 422 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.3 ip dhcp next-server
This command sets the next boot server in the DHCP server configuration parameters. The no
form of this command deletes the next boot server from the DHCP server configuration
parameters.
ip dhcp next-server <ip address>
no ip dhcp next-server
Syntax Description
ip address - IP address of the server (TFTP server)
Mode
Global Configuration Mode
Example
iss (config)# ip dhcp next-server 12.0.0.1
Related Commands
service dhcp-server - Enables the DHCP server
show ip dhcp server information - Displays the DHCP server information
show ip dhcp server binding - Displays the DHCP server binding information
show ip dhcp server pools - Displays the DHCP server pools
show ip dhcp server statistics - Displays the DHCP server statistics