Release : 1.1f 519 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
20.4 redistribute-policy
This command adds the permit/deny Redistribution Policy and the no form of the command
removes the permit/deny Redistribution Policy
redistribute-policy {permit|deny} <DestIp> <DestRange>
{connected|static|rip|ospf|bgp} {rip|bgp|ospf|all}
no redistribute-policy <DestIp> <DestRange>
Syntax Description
permit - Sets the default rule for all prefixes to 'permit'
deny - Sets the default rule for all prefixes to 'deny'
DestIp - Destination IP address
DestRange - Destination range
connected Connected routes
static - Static routes
rip - Routing Information Protocol
ospf - Open Shortest Path First
bgp - Border Gateway Protocol
all - All
Mode
Global Configuration Mode
Defaults
permit all
Example
iss (config)# redistribute-policy permit 10.0.0.0 0.0.0.255
connected ospf
The addresses learnt within the specified range through the specified routing
To Next Page
Loading...
