Release : 1.1f 754 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.44 show ip bgp extcommunity - routes
This command displays routes that belong to specified BGP extended-communities.
show ip bgp extcommunity <value(xx:xx:xx:xx:xx:xx:xx:xx)> [exact]
Syntax Description
exact - Displays the routes that has the same specified extended communities
Mode
Privileged EXEC Mode
Example
SMIS# show ip bgp extcommunity 01:02:33:33:33:33:33:33
BGP table version is 5,local router ID is 10.0.0.2
Status codes: s suppressed, d damped, h history, * valid, > best,
i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Path
------- ---- --- ------ ------ ----
75.0.0.0/8 10.0.0.1 1 100
79.0.0.0/8 10.0.0.1 1 100
SMIS# show ip bgp extcommunity 01:02:33:33:33:33:33:33 exact
BGP table version is 5,local router ID is 10.0.0.2
Status codes: s suppressed, d damped, h history, * valid, > best,
i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Path
------- ---- --- ------ ------ ----
75.0.0.0/8 10.0.0.1 1 100
BGP Speaker Local AS number must be configured.
Related Commands
router bgp – Sets the AS number of the BGP Speaker
bgp ecomm-route – Configures an entry in additive or delete extended community table
bgp ecomm-peer – Enables/disables advertisement of extended community attributes to peer
To Next Page
Loading...
