Release : 1.1f 438 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.17 host hardware-type
This command specifies the hardware address of a Dynamic Host Configuration Protocol (DHCP)
client and host specific DHCP options. The no form of the command deletes the host option.
host hardware-type <type (1-2147483647)> client-identifier <mac-
address> option <code (1-2147483647)> { ascii <string> | hex <Hex
String> | ip <address> }
no host hardware-type <host-hardware-type (1-2147483647)> client-
identifier <client-mac-address> option <code (1-2147483647)>
Syntax Description
type- Host hardware address type
client identifier - Host MAC address
option - The tag octet of the DHCP option
ascii - ASCII String
hex - Hex String
ip - Host IP address
Mode
DHCP Pool Configuration Mode
Example
SMIS(dhcp-config)# host hardware-type 1 client-identifier
00:11:22:33:44:55 option 254 ip 10.0.0.1
The current valid values are only 0 and 1.
Related Commands
service dhcp-server - Enables the DHCP server
ip dhcp pool - Creates a DHCP server address pool and places the user in the DHCP pool
configuration mode
To Next Page
Loading...
