Supermicro SSE-G48-TG4 - Ipv6 Nd Retrans-Time

Release : 1.1f 788 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.14 ipv6 nd retrans-time
This command sets the advertised retransmit time. The no form of the command resets the
advertised retransmit time to its default value 1.
ipv6 nd retrans-time <Retrans Time (1-3600)>
no ipv6 nd retrans-time
Syntax
<Retrans Time (1-3600)> - Any valid number between 1 to 3600
Mode
Interface Configuration Mode
Defaults
1
Example
SMIS(config-if)# ipv6 nd retrans-time 300
Related Commands
show ipv6 interface – Displays the IPv6 interfaces
no ipv6 nd suppress-ra – Enables IPv6 router advertisement