Release : 1.1f 890 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.1 set qos
This command enables differentiated services on the device. The disable option is used to
disable the QoS feature on the device.
set qos { enable | disable }
Syntax Description
enable - Enables differentiated services
disable - Disables differentiated services
Mode
Global Configuration Mode
Defaults
disable
Example
SMIS(config)# set qos enable
QoS must be globally enabled prior to the execution of the class-map and policy-map mode
commands.
When set as 'enabled', DiffServ Module programs the hardware and starts Protocol Operation.
When set as 'disabled', it stops protocol operation by deleting the hardware configuration.
Related Commands
show policy-map - Displays the quality of service (QoS) policy maps
show class-map - Displays quality of service (QoS) class maps
To Next Page
Loading...
