Release : 1.1f 467 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.18 show snmp
This command displays the status information of SNMP communications.
show snmp
Mode
Privileged EXEC Mode
Example
SMIS# show snmp
0 SNMP Packets Input
0 Bad SNMP Version errors
0 Unknown community name
0 Get request PDUs
0 Get Next PDUs
0 Set request PDUs
0 SNMP Packets Output
0 Too big errors
0 No such name errors
0 Bad value errors
0 General errors
0 Trap PDUs
SNMP Manager-role output packets
0 Drops
SNMP Informs:
0 Inform Requests generated
0 Inform Responses received
0 Inform messages Dropped
0 Inform Requests awaiting Acknowledgement
To Next Page
Loading...
