Release : 1.1f 850 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.19 redist-config
This command configures the information to be applied to routes learnt from RTM. The no form of
the command deletes the information applied to routes learnt from RTM.
redist-config <IPv6-Prefix> <Prefix-Length> [metric-value <metric>]
[metrictype {asExttype1 | asExttype2}] [tag <tag-value>]
no redist-config <IPv6-Prefix> <Prefix-Length>
Syntax Description
IPv6-Prefix - The IPv6 address prefix
Prefix-Length - The prefix length of the address
metric-value - The Metric value applied to the route before it is advertised into the OSPFv3
Domain
metric-type - The Metric Type applied to the route before it is advertised into the OSPFv3
Domain
tag - The Tag Type describes whether Tags will be automatically generated or will be manually
configured
Mode
Router Configuration Mode
Example
SMIS(config-router)# redist-config 3ffe:5000:481d::5 80 metricvalue
30 metric-type asExttype1 tag 12
Related Command
show ipv6 ospf redist-config – Displays the configuration information to be applied to
the routes learnt from the RTM
To Next Page
Loading...
