Supermicro SSE-G48-TG4 - Ipv6 Nd Reachable-Time

Release : 1.1f 787 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.13 ipv6 nd reachable-time
This command sets the advertised reachability time. The no form of the command resets the
advertised reachability time to default value.
ipv6 nd reachable-time <Reachable Time (1-3600)>
no ipv6 nd reachable-time
Mode
Interface Configuration Mode
Defaults
30
Example
SMIS(config-if)# ipv6 nd reachable-time 500
Related Commands
show ipv6 interface – Displays the IPv6 interfaces
no ipv6 nd suppress-ra – Enables IPv6 router advertisement