Supermicro SSE-G48-TG4 - Show Ip Bgp Timers

Release : 1.1f 762 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.51 show ip bgp timers
This command displays the value of BGP timers.
show ip bgp timers
Mode
Privileged EXEC Mode
Example
SMIS# show ip bgp timers
Peer Timers
Peer Address Holdtime KeepAliveTime ConnectRetry ASOrig RouteAdvt
---- ------- -------- ------------- ------------ ------ ---------
10.0.0.2 500 100 400 350 300
10.0.0.3 120 30 30 15 30
10.0.0.4 120 30 30 15 30
10.0.0.6 120 30 30 15 30
10.0.0.7 120 30 30 15 30
10.0.0.8 120 30 30 15 30
BGP Speaker Local AS number must be configured.
Related Command
ip bgp dampening – Configures the Dampening Parameters