Release : 1.1f 586 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.14 ipv6 pim bsr-candidate
This command sets the preference value for the local PIMv6 interface as a candidate bootstrap
router. The no form of the command sets the default preference value for the local PIMv6
interface as a candidate bootstrap router.
ipv6 pim bsr-candidate <value (0-255)>
no ipv6 pim bsr-candidate
Mode
Interface Configuration Mode
Defaults
0
Example
iss (config-if)# ipv6 pim bsr-candidate 1
A BSR is a dynamically elected router within the PIMv6 domain.
Related Command
show ipv6 pim bsr – Displays the PIMv6 BSR information
To Next Page
Loading...
