Release : 1.1f 968 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.7 lldp tx-delay
This command configures the minimum time interval maintained between any two subsequent
LLDP messages sent out.
The no form of this command resets this transmit delay to its default value 2 seconds.
lldp tx-delay <seconds(1-8192)>
no lldp tx-delay
Syntax Description
tx-delay – any number between 1 to 8192
Mode
Global Configuration Mode
Defaults
2 seconds
Example
SMIS(config)# lldp tx-delay 15
Related Commands
show lldp – Displays the LLDP feature information.
To Next Page
Loading...
